out of stock, products typically restock in less than a week- price: $89.99

Arduinome BLACK Acrylic Case Kit (#ci0278)

short description:

An opaque, black case for the arduinome, a DIY version of the monome (monom.org). Designed for SparkFun 64 SparkFun buttons and arduino Diecimila.

more information and instructions:

Comes with all necessary hardware, including:

• (16) 8-32 screws
• (16) 8-32 nuts
• (4) rubber feed
• (2) 4-40 standoffs
• (1) 2-56 screw (for small arduino mounting hole)
• (5) 2-56 nuts (for small arduino standoff and nut)
• (20) 4-40 .5" screws for buttons
• (20) #4 lock washers for buttons
• (22) 4-40 nuts (for standoffs and button screws)

You'll also need:

• arduino
• unsped shield
• spark fun buttons and pcbs
• (64) bright LEDs (1000mcd blue LEDs shown)
• (64) small-signal diodes
• 8-Bit Shift Register. mouser: 512-MM74HC164N
• 8-Bit PISO Shift Reg. mouser: 511-M74HC165
• 10uF cap
• (3) .1uF caps
• 10 Pin Common Bus Resistor Network, mouser: 266-100K-RC
• (2) 2x8 headers
• (2) 16 pin IDC sockets
• ribbon cable
• (1)single row male headers
• 24 pos. socket, 14 pos. socket, 16 pos. socket
• MAX7721 or MAX7719
• current limiting resistor, see the forward voltage chart here

Please see our blog post detailing the build process.

Customer Build (black version): dj_edition's build

SparkFun buttons are larger than the monome buttons. Cases and faceplates are not compatible.